Fisher & Paykel DW60U2I, User Manual, Page: 9 / 36

5
SETTING DELAY START
This feature can delay the start of a wash programme by 1 to 12 hours.
1
Load the dishes, add detergent and close the door.
2
Open the door to turn the dishwasher on.
3
Check that the display shows the wash programme you require. If not, see instructions
for ‘Changing the wash programme’.
4
Touch and hold
z z
The delay start indicator will light up and the display will show the
delay time (hours).
5
Touch again to increase the number of hours you wish to delay the wash by
(1hr - 12hr in hour steps).
Note: Scrolling past 12 hours will exit delay start.
6
Delay start is now set. The display will countdown in hours. The wash programme will
automatically start when the delay time is over.
z z
The Delay start indicator will be on when Delay start begins its countdown.
z z
If the door is open when the countdown is finished, the dishwasher will beep and the
display will flash. After 7 seconds the dishwasher will turn off.
To cancel Delay start , touch and hold until there is a beep.
touch and hold