Make sure the installer has removed all packaging and
completed the ‘Final checklist’ in the Installation instructions.
continued >
USING YOUR DISHWASHER – QUICK REFERENCE
A
B
E
F
G
H
I
J
K
L
M
C
D
Start
Press
once to start the wash.
To pause:
Press
again or open the door
carefully.
Delay start
Press and hold the button for a
second to enter delay start.
(See ‘Setting delay start’)
Keylock
●
Keylock disables all the buttons so
that a wash cannot accidentally be
started.
●
Keylock can be activated or canceled
at any stage, including while a wash
programme is running.
To activate:
Press and hold
and
together
for a second until you hear a beep.
The keylock indicator will come
on and remain lit until keylock is
canceled.
To cancel:
Press and hold
and
together
for four seconds until you hear a
beep. The keylock indicator will flash
and then go out.
Wash program indicators
These show which programme is
selected.
Half load indicator
If lit: half load function is activated
Wash modifier indicators
If lit: wash modifer is activated
Display
This shows:
- the time remaining (minutes)
- the delay start time (hours)
- Fault code numbers
(see section ‘If there is a fault code’)
Wash progress indicators
Shows the stage of the wash cycle
currently in progress.
Keylock indicator
If lit: keylock is activated.
Rinse aid indicator
If lit: Rinse aid dispenser requires
filling.
Delay start indicator
If lit: start is delayed.
Off/On
Press
to turn the dishwasher on or off.
Half load selector
1/2
Press and hold
for a second until you hear
a beep. The half load indicator will come on.
Wash programme selector
Press
to scroll through the wash
programmes.
Wash modifier selector
Press
to scroll through the wash modifier
options. (See ‘Setting wash modifiers’)
PRODUCT OVERVIEW
CONTROLS OVERVIEW
Controls Description
Detergent
and rinse aid
dispensers
Centre spray arm
Upper spray arm
Lower spray arm
Filters
1
Discard food scraps and load dishes
carefully
●
Scrape large food particles off (e.g.
bones, fruit stones) and remove any
foreign objects (e.g. toothpicks, strings,
paper).
●
To help with wash performance, arrange
dishes so they are evenly spaced and
not nesting.
For more detail, see user guide:
‘Caring for your dinnerware’
‘Loading’
Starting a wash
3
Turn power on
(also check water is turned on)
For more detail, see user guide:
‘Controls and starting a wash’
4
Check rinse aid level, refill if necessary
●
If the rinse aid level is low, the rinse aid
indicator on the display will light up.
●
Press the button to snap the
dispenser cover open
●
Pour rinse aid into the circular
opening (up to the MAX marking)
●
Wipe up any spills and click shut the
cover.
For more detail, see user guide:
‘Using rinse aid’
8
Start wash
●
Press
to start the wash programme
OR set Delay start
●
Press and hold for a second to enter
delay start. Press and hold again to
increase the time (in hours).
For more detail, see user guide:
‘Setting Delay start’
To cancel a wash once it has started
●
Press
to cancel the programme.
---
will show in the display, then the
wash progress indicators will go out and
the display will turn off.
●
If you wish, you can start a different
programme.
Note: you may need to refill the
detergent dispenser.
To pause and restart a wash
programme
●
Press
to pause the programme.
●
The programme status (eg Wash) will
flash while the dishwasher is paused.
Open the door very slowly.
IMPORTANT!
There is a risk of being sprayed with
hot water. Do not fully open the door
until the spray arms have stopped
rotating.
●
Load, remove, or rearrange any dishes
if needed.
●
Press
to restart the programme.
If the dishwasher is not restarted
within 7 minutes, it will then beep
until the cycle is restarted.
After the wash has ended
9
The dishwasher will beep. The display
will show
0
. After 30 seconds the
display will turn off.
!0
Open the door slightly and leave ajar to
help drying. Once cooled, unload dishes
carefully
For more detail, see user guide:
‘After the wash’
●
Check condition of dishwasher, clean if
necessary
5
Check that nothing obstructs the spray
arms, then close the door firmly
6
Select wash programme
●
Press
to scroll through the wash
programmes.
7
Select wash modifiers (optional)
●
Press
to scroll through the wash
modifier options
●
not all modifiers are available for
every wash programme
●
only one modifier can be set at a time
●
For more detail, see user guide:
‘Setting wash modifiers’
2
Add detergent
●
Fill the detergent dispenser with
powdered detergent and close the
dispenser door or place a dishwasher
tablet in the cutlery basket.
For more detail, see user guide:
‘Water hardness and dishwashing’
‘Wash programmes and detergent
quantities’
‘Adding detergent’
Rinse aid level indicator
Spray arm
A
D
E
G
H
J
K
L
M
I
F
B
C
Auto
Senses the optimal wash programme for
your dishes
Heavy
Heavily soiled pots, pans and dishes.
Normal
(Default)
Dishes with normal soils for optimum
wash and dry performance
Normal
Eco
Dishes with normal soils for optimum
energy and water usage
Fast
A fast wash for lightly soiled dishes
Delicate
For lightly soiled and heat sensitive
crockery
Rinse
Prevents odours and soils from drying
on dishes
Upper basket
Cutlery tray
Lower basket
Serial label
Door seal
For detailed information on the
features of your dishwasher
For warranty information
If you…
●
have any questions or comments
●
need a Fisher & Paykel authorized
technician to service your product
●
need replacement parts or accessories
●
want to register your product
see your ‘User guide’
see your ‘Service and warranty’ booklet
see your ‘Service and warranty’ booklet or contact us
NZ
toll-free, 24/7
0800 372 273
AU
toll-free, 24/7
1300 650 590
www.fisherpaykel.com
NZ AU
DISHWASHER - DW60FC6 MODELS
QUICK START GUIDE
