Fisher & Paykel DW60FC2X1, Troubleshooting Manual, Page: 5 / 6

Problem Possible Causes What to do
Spray arm holes
are blocked.
Clean the spray arm(s). See ‘ Care and cleaning ’ for instructions.
The filters are
blocked.
Clean the filters. See ‘ Care and cleaning ’ for instructions.
Plastic items are
discoloured (e.g.
stain left by tomato
sauce).
Not enough
detergent, not pre-
rinsed.
Pre-rinse plastic dishes before placing in the dishwasher and/or
add more detergent.
Alternatively, using the Rinse programme after adding dishes
may minimise staining.
White stains are left
on dishes; glasses
have a milky
appearance.
Not enough
detergent.
See section ‘ Wash programmes and detergent quantities ’ for
recommended quantities. You may need to adjust these to suit
the hardness of your water supply.
Rinse aid dosage
too low.
Increase rinse aid dosage. See ‘ Using rinse aid ’.
Dishes, cutlery have
not dried.
Rinse aid dosage
too low.
Increase rinse aid dosage. See ‘ Using rinse aid ’.
Items removed too
soon.
After the end of the wash programme, leave the door ajar and
wait for several minutes to
help drying.
Rinse aid
dispenser empty.
(The rinse aid
indicators are lit.)
Add rinse aid. See section ‘ Using rinse aid ’ for instructions.
Glasses have dull
appearance.
Rinse aid dosage
too low.
Increase rinse aid dosage. See ‘ Using rinse aid ’.
https://producthelp.fisherpaykel.com/au/Clean/Dishwashers/DW60FC2X1/User_Guide_DW60FC2X1/16_Troubleshooting
Updated: Sat, 29 May 2021 17:23:31 GMT
Powered by
5