Fisher & Paykel DishDrawer DD24DA, User Manual

Page: 29 / 40

25
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE WHAT TO DO
The wash program
seems to have
finished (the
dishwasher is
idle), but the end
of wash beeps
haven’t sounded
and the
drawer cannot be
opened
The wash program is
still
underway. It is in a
‘quiet’
phase that is needed for
ensuring the best wash
results. No action required. The program will
transition into a more audible phase
after the ‘quiet’ phase is over.
Water pooling
on inner rim of
drawer after a
wash
This is normal
condensation. Wipe dry.
Water under the
drain filter
This is normal and needs no action.
Excess water in
the drawer
Drain hose(s) bent or
kinked. Straighten the drain hose(s).
Blocked filters. Clean the filter plate/drain filter. Refer to
’User maintenance instructions’.
Water marks on
the dishes
Rinse aid depleted. Refill the rinse aid dispenser.
Rinse aid setting too
low or off. Increase the rinse aid setting.
Dishwasher overloaded/
incorrectly loaded. Refer to the section on loading.
Drawer interior is
stained
Some foods, like tomato
based products, may
stain the inside of the
drawer. Pre-rinse dishes before placing in the
drawer. Alternatively, using the Rinse
program after adding the dishes may
minimise staining.