manualshive.com logo in svg

Fisher & Paykel DH9060P2, User Manual, Page: 10 / 48

Share
Download
Fisher & Paykel DH9060P2 User Manual Download Page 10

10

CONTROL PANEL

Timed cycles

When a timed cycle is selected the machine dries for the selected time regardless 
of the level of moisture in the load. It is important to check the items throughout the timed 
programmes to avoid over drying. Timed cycles include 

TIME DRY, RACK DRY

 and 

WOOL

. 

Timed programmes of 10 to 150 minutes can be selected using the 

MORE

   and  

LESS 

 buttons.

When the dryer has sensed that the load is dry it 
will automatically go into an airing or cool down 
cycle. During 

COOL

 the drum tumbles and cool air 

is blown through the clothes. This cools the load to 
reduce creasing if the clothes are left in the dryer.

Airing/Cool down

Time to go

Your dryer displays approximately how many 
minutes the cycle you are running has remaining if 
you have chosen one of the 

TIME DRY

 cycles. If you 

have chosen an automatic cycle (ie not 

TIME DRY

) 

the word 

 will appear on the screen until it 

reaches the cool down phase, at which time the 
dryer will display how long the cycle has left to go. 
A number of factors can influence the overall cycle 
time, eg the fabric type of garments, load size, the 
wetness of the load, environmental conditions etc. 

Summary of Contents for DH9060P2

















































Reviews:

No comments