background image

28

TROUBLESHOOTING

The following is a list of problems you may encounter when using this appliance and 
some suggestions that may help to correct the problem. If you still have problems, 
contact your Fisher & Paykel trained and supported service technician.

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Pressing ‘POWER’ 

does not turn on 

the

 

dryer

Fault with household  
power supply. 

Try plugging in and turning on another 
electrical device. 

Dryer does 

not

 

heat

Dryer set to ‘Cool Air’ cycle.

Check what cycle the dryer is set to 
(refer ‘Drying cycles’). Change to 
preferred cycle.

Full water tank. 

Refer to ‘Emptying the water collection tank’. 

The dryer has progressed  
to ‘Cool’. 

Check the progress — are ‘Cool’ or ‘End’ shown 
on the display? Refer to ‘Progress lights’. 

Touching

 

 

does not start 

the drying cycle 

Dryer door not closed 
properly. 

Open and reclose the door. Check that 
the lint filter is correctly in place and not 
obstructing the door.

Is the dryer displaying a 
user prompt or fault code? 

Refer to ‘User warnings’ and ‘Fault codes’.

Water tank full or not 
properly in place. 

Refer to ‘Emptying the water collection tank’. 
Ensure the water tank is properly in place. 

Lint filter needs to be 
emptied.

Empty the lint filter and ensure it is correctly 
in place. 

Dryer is overloaded. 

Remove some items from the dryer. 

‘Delay Start’ function is set. 

Refer to ‘Delay Start’ for more information. 

Keylock is ON.

To disable touch and hold   button 
for 3 seconds.

Dryer keeps 

stopping 

and starting

The ‘Wrinkle Free’ option 
has been selected. 

Refer to ‘Wrinkle Free’ for more information. 

Dryer stops 

working  

mid-cycle

Power failure. 

Press ‘POWER’ and restart the desired cycle. 

Dryer has been paused. 

Touch the 

 button to restart the cycle. 

Dryer door is open. 

Ensure the door is firmly shut. 

Water tank full or not 
properly in place.

Refer to ‘Emptying the water collection tank’. 
Ensure the water tank is properly in place.

Items fell off the rack 
when using ‘Rack Dry’ or 
‘Wool’ 
cycles.

Ensure the rack is installed correctly  
(refer to ‘Sorting and loading’, ‘Drying rack’) 
and replace garments that may have fallen 
from it.

Environmental conditions 
may be affecting dryer 
operation.

In particularly cold conditions, the 
room temperature may be too cold for 
the dryer to run efficiently.

Summary of Contents for DH9060P









































Reviews: