11
Selecting a programme and operating your machine
Ending the programme through cancelling
The programme which is selected first will keep on going even if the position of the programme
selection button is changed. A new programme can be selected or the original drying
programme changed after a programme has been cancelled. In order to cancel the selected
programme press the
StARt/PAUSe/CANCel
button for about 3 seconds. The
CleAN FIlteR
,
tANk
FUll
and
eNd/ WRINkle GUARd
warning LEDs will light up at the end of this period for reminding
purposes.
As the inside of the machine may be excessively hot when you cancel the programme while the
machine is running, activate the
FReSHeN UP
programme to cool it down.
If the machine is stopped during any drying programme, and if the position of the programme
selection knob is changed, an audio signal will be heard (if the
BUzzeR CANCel
function is not
selected). The machine will not start even if the
StARt/ PAUSe/CANCel
button is pressed, unless
the programme selection knob is returned to the initial programme. The paused programme
must be cancelled in order to change the drying programme.
End of programme
The
eNd/WRINkle GUARd
,
CleAN FIlteR
and
tANk FUll
warning LEDs on the programme follow up
indicator will light up when the programme comes to an end. The door can be opened and the
machine becomes ready for a second cycle. Press the
ON/OFF
button to shut down the machine.
Important!
Clean the filter and drain the water tank after each drying process.
