Fisher & Paykel DD90S(H)TI2 (Integrated), Installation Instructions Manual, Page: 8 / 24

8
The following calculations assume the top of the panel is aligned
with the top of the adjacent cabinetry:
WIDTH OF THE PANEL
Measure A ( the width between adjacent door/drawer fronts)
and write it in the fi rst box below, then complete the equation.
HEIGHT OF THE PANEL
Measure B and write it in the fi rst box below, then complete
the equation.
A
B
clearance to
adjacent cabinet
front (min. 2 mm)
ventilation gap
(min. 2 mm)
WIDTH OF PANEL
(min. 855 mm)
HEIGHT OF PANEL
-
2
x
-
=
=
FRONT PANEL SPECIFICATIONS
16 -20 mm panel thickness
Maximum weight of panel: 9 kg
Adequately sealed to withstand moisture (50 O C @ 80% RH). Because of
it being a hot and wet environment generally, the back and sides of the
panel should be completely sealed with a waterproof vapour barrier (ie
polyurethane) to prevent damage to the panel.
The back of the panel (including any integrated handle) should be
completely flush so that the seal between the panel and the rubber trim is
maintained.
INTEGRATED MODELS WITH REMOTE (NZ AU) ONLY - CUSTOM FRONT PANEL CALCULATIONS
6a
Note: when the top of the dishwasher has to be lower than the adjacent
cabinetry, the panel can be increased in height.
min. 2mm ventilation
gap with external venting
kit installed
min. 2mm ventilation gap with
external venting kit installed
WIDTH OF PANEL
HEIGHT
OF PANEL
A
B
min. 2mm
min. 2mm
min. 2mm
min. 2mm