Problem
Possible Cause
What to Do
/
button not pressed.
Press the
/
button.
Dishdrawer is in
“Showroom mode”.
Contact Customer Care.
Fan noise coming from the
dishwasher after a wash
program has finished
This is normal. The drying
fan continues to run for a
set period of time after a
program has finished to
assist with drying.
No action required. The fan will automatically stop
after the set time is over, or when the drawer is
opened. In some cases, the fan may resume when
the drawer is closed again.
Fan noise starts up when I
close the drawer, even
though I didn’t start a new
wash
This is normal. In some
cases, the drying fan will
run whenever the drawer
is closed for a set period of
time after a program has
finished.
No action required. The fan will automatically stop
after the set time is over
No powdered detergent
dispensed
Detergent dispenser was
wet when loaded.
Clean the dispenser and ensure it is dry before
adding detergent.
The wash program seems to
have finished (the
dishwasher is idle), but the
end of wash beeps haven’t
sounded and the drawer
cannot be opened
The wash program is still
in progress. It is in a ‘quiet’
phase that is needed for
ensuring the best wash
results.
No action required. The program will transition into a
more audible phase after the ‘quiet’ phase is over.
Water pooling on inner rim
of drawer after a wash
This is normal
condensation.
Wipe dry.
Water under the drain filter
This is normal and needs
no action.
Excess water in the drawer
Drain hose(s) bent or
kinked.
Straighten the drain hose(s).
Blocked filters.
Clean the filter plate/drain filter. Refer to ’User
maintenance instructions’.
Water marks on the dishes
Rinse aid depleted.
Refill the rinse aid dispenser.
Rinse aid setting too low or
Increase/turn on the rinse aid setting.
Updated: Thu, 14 Jul 2022 17:36:34 GMT
Powered by
4
