Fisher & Paykel DD60DCHX9 Installation Manual Download Page 3

3

!

 WARNING!

Electric Shock Hazard 

Failure to follow this advice may result in 

electrical shock or death.

•  Before installing the DishDrawer, remove the 

house fuse or open the circuit breaker.

•  This appliance must be earthed. In the event 

of a malfunction or breakdown, earthing will 

reduce the risk of electric shock by providing a 

path of least resistance for electric current. This 

appliance is equipped with a cord having an 

equipment-earthing conductor and an earthing 

plug.

•  The plug must be plugged into an appropriate 

outlet that is installed and earthed in accordance 

with all local codes and ordinances. 

•  WARNING – Improper connection of the 

equipment-earthing conductor can result in a 

risk of electric shock. Check with a qualified 

electrician or service representative if you are in 

doubt as to whether the appliance is properly 

earthed.

•  Do not modify the power supply plug provided 

with the appliance – if it will not fit the outlet, 

have a proper outlet installed by a qualified 

electrician. Do not use an extension cord, adapter 

plug or multiple outlet box.

SAFETY AND WARNINGS

!

 WARNING!

Tip Hazard

Failure to follow this advice may result in 

injury or product damage. 

•  Take care when removing product 

from packaging.

•  If drawers are pulled open while product is not 

secured to cabinetry, product may tip.

!

 WARNING!

Cut Hazard

Failure to use caution could result in injury.

•  Take care – panel edges are sharp.

Summary of Contents for DD60DCHX9

















Reviews: