manualshive.com logo in svg

Fisher & Paykel DD24STX6PX1, Installation Manual

Share
Download
Fisher & Paykel DD24STX6PX1 Installation Manual Download Page 4

4

TOOLS AND COMPONENTS

 

z

Keep all packing materials until the unit has been inspected.

 

z

Inspect the product to ensure there is no shipping damage. If any damage is detected 
contact the dealer or retailer you bought the product from to report the damage. 

 

z

Fisher & Paykel is not responsible for shipping damage.

Side mounting bracket 

kits (1)*

*Optional   |   **Comes fitted to the product

Rubber washer (1)**

Drain hose support (1)

Flat-blade screwdriver

Level

Top mounting bracket 

kit (1)*

1 1/2" (38mm) bottom fixing 

screws and washers (2)

Drain hose joiner (1)

Powered driver

Pliers

Box cutter

Pencil

Multi-tool

Moisture protection 

tape (1)

Wire clip (1)

5/8" (16mm) Phillips 

screws (7)

Clamp (1)

Supplied

Not supplied

PARTS SUPPLIED 

TOOLS REQUIRED

INSTALL VIDEO

This video provides an overview of what is needed to install a DishDrawer™ Dishwasher. It is 
intended as an overview only of the installation process and is not intended to be used as a 
standalone guide on how to install a DishDrawer™ Dishwasher yourself. Installation should be 
undertaken by a Fisher & Paykel trained and supported service technician or qualified person.

To access installation videos

Scan the QR code with  your smartphone or watch online at:  
fisherpaykel.com/dishdrawer-install

Summary of Contents for DD24STX6PX1


















Reviews:

No comments

Brands by name

Popular brands

Load more brands