Problem
Possible Cause
What to Do
Drawer will not open (no
beeping, no wash
underway)
Childlock feature is on or
the ‘Closed drawer
autolock’ option is on, or
both.
Turn the Childlock off. See your Quickstart guide
for instructions.
Closed drawer auto lock
is on.
Press any button and open drawer within 30
seconds.
Power failure during cycle
Power outage in your
home or area.
Wait until power resumes, cycle will restart in
same part of wash program.
Continuous beeping with
A/F code in display
A fault has occurred.
Intermittent beeping
Dishwasher is in pause
mode.
Close the dishwasher and press the
button to resume the program.
High-pitched, subtle
beeping during a wash
program
Rinse aid is being
dispensed.
This is normal and needs no action.
Dishwasher will not start
Power supply is not
connected.
Connect the power supply.
The drawer is not closed
properly.
Ensure the drawer is firmly closed.
Keylock or Childlock
feature is on.
Turn the Keylock or Childlock off. See your
Quickstart guide for instructions.
button not pressed.
Press the
button.
Dishdrawer™ is in
“Showroom mode”.
Contact Customer Care.
Fan noise coming from the
dishwasher after a wash
program has finished
This is normal. The
drying fan continues to
run for a set period of
time after a program has
finished to assist with
drying.
No action required. The fan will automatically stop
after the set time is over, or when the drawer is
opened. In some cases, the fan may resume when
the drawer is closed again.
Updated: Tue, 16 Nov 2021 11:46:45 GMT
Powered by
3
