28
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Dryer keeps
stopping and
starting.
The ‘Wrinkle Free’ option
has been selected.
Refer to page 20 for more
information.
Dryer stops
working mid-
cycle.
Power failure.
Press
and restart the desired
cycle.
Dryer has been paused.
Touch the
button to restart the
cycle.
Dryer door is open.
Ensure the door is firmly shut.
Dryer is taking too
long/ results were
not satisfactory.
Drying cycle selected not
appropriate for the load.
Select an appropriate cycle for the
load. Refer to pages 15 and 18.
Dryness level selected not
appropriate for the load.
Select a higher dryness level. Refer
to page 19.
Selected drying temp, not
appropriate for the load.
Select a higher drying temp. Refer
to page 19.
Dryer overloaded for the
cycle.
Some cycles have a lower max load
size. Refer to page 18.
Try dividing the load in half and dry
half at a time.
Lint filter is blocked.
Clean the lint filter.
Condenser is blocked.
Clean the condenser. Refer to
page 23.
Water tank is full.
Empty the water tank. Refer to
page 23.
Environmental conditions
may be affecting dryer
operation.
In hot, humid conditions the dryer
will take longer to dry a load and be
less efficient.
Load overly wet at the start
of cycle.
Remove more water from the load
before placing it in the dryer, eg
select a faster spin speed on your
washer, if appropriate for your load.
Dryer not draining water out
properly.
Check the drain hose (if connected)
for blockages or damage. You may
need to call for service (refer to
page 35).
Items got wrapped up
inside other items.
Try separating items and drying
similar items together. Open
items out when you place them
in the dryer. Do not fold them up.
Untangle items, eg pull long sleeves
out so they are not stuck/trapped
on the inside of the garment.
Summary of Contents for DC8060P
Page 1: ...CONDENSER CLOTHES DRYER DC8060P Model INSTALLATION GUIDE USER GUIDE NZ AU SG ROW ...
Page 2: ......
Page 39: ......
