12
PRE-FINISHED TOE KICK
1
1
2
2
3
4
Ensure brackets are oriented correctly
before fitting to the panel using 2 x
screws per bracket.
Ensure door swing is unobstructed
before securing the seals using the
provided washers and 4.2 x 50mm
screws.
Align the brackets to the slots on the
product and slide into place.
Measure the distance between the floor
and the base of the door. Refer to the
table and mark out the cut location.
Score at the marked height, snap off
excess material and smooth edges.
Align both sound seal sheets to the
base of the dishwasher. If required, trim
excess felt.
Measure the toe kick depth:
Use
Z
to determine which tooth to
bend back on each toe kick bracket.
x
z
-
=
toe kick recess
panel thickness
42mm
toe kick depth
INSTALL TOE KICK
INSTALL SOUND SEAL
Summary of Contents for CONTEMPORARY DW60UNT4B2
Page 2: ......
