
6
INSTALLATION INSTRUCTIONS
UNPACKING AND EXAMINING YOUR MICROWAVE OVEN
Remove all packing materials from inside the microwave oven
cavity; however, DO NOT REMOVE THE WAVEGUIDE COVER,
which is located on the top cavity wall. Read enclosures and
SAVE this manual.
Check the microwave oven for any damage, such as misaligned
or bent door, damaged door seals and sealing surfaces, broken
or loose door hinges and latches and dents inside the cavity
or on the door. If there is any damage, do not operate the
microwave oven and contact your dealer or DCS AUTHORIZED
SERVICER.
CHOOSING A LOCATION FOR YOUR MICROWAVE OVEN
You will use your oven frequently so plan its
location for ease of use. Allow at least 2 inches on
the sides, top and at the rear of the oven for air
circulation.
Your microwave oven can be built into a cabinet or
wall by itself or above wall oven models WOSU-30
(DCS by Fisher & Paykel) or OB30SDEPX1(Fisher
& Paykel), using the appropriate (DCS by Fisher
& Paykel branded or Fisher & Paykel branded)
Microwave Accessory Trim Kit (CMOTTK). It cannot
be built in above conventional gas or electric
range or any other wall oven.
Summary of Contents for CMOS-24SS
Page 54: ...54 WARRANTY See your Service Warranty booklet for warranty details ...
Page 55: ...55 ...
Page 111: ...57 ...