Fisher & Paykel CG905DX1 Using Download Page 1

Page: 1 / 3

Using your cooktop

Details how to start cooking and general procedure for using wok burners.

1. Identify the dial of the burner you want to use.

2 Press down (a) then turn anti-clockwise to High (b).

• The ignitors will start clicking as they spark.

• If there is no clicking, there is no spark to light the

burner. If the burner fails to light turn the dial back to off
(o) and see ‘Troubleshooting’.

3 After the burner has lit, keep the dial held down for

3 more seconds (a), then release.

4 When you have finished cooking, turn the dial clockwise

back to off (o).

Updated: Tue, 16 Nov 2021 11:44:18 GMT

Summary of Contents for CG905DX1

Page 1: ...s no clicking there is no spark to light the burner If the burner fails to light turn the dial back to off o and see Troubleshooting 3 After the burner has lit keep the dial held down for 3 more secon...

Page 2: ...d a burner or some flames flicker The flame goes out when you release the dial 3 seconds after lighting The flame is yellow or yellow tipped rather than blue The flames are too large small irregular n...

Page 3: ...Wok burner illustrated Pan supports may vary https producthelp fisherpaykel com nz Cook Cooktops Gas Steel Five_Burners CG905DX1 User_Guide_CG905DX1 03_Usi Updated Tue 16 Nov 2021 11 44 18 GMT Powere...