16
CARE AND CLEANING
Flame ports
(mini wok
burner
only)
WHAT?
HOW OFTEN?
HOW?
IMPORTANT!
Burner caps
and rings, flame
spreaders, pan
supports, wok
stand
As needed, but
at least once a
month
1
Remove the parts that you
wish to clean.
See the the illustrations
following this chart.
2
Soak stubborn stains in
a solution of biological
clothes washing detergent
or powdered dishwasher
detergent.
3
Clean the parts in hot soapy
water. Use a stiff nylon brush
or straight-ended paper clip
to clear the flame ports.
4
Rinse in warm water.
5
Dry thoroughly.
6
Replace the parts correctly,
as shown in the drawings
following this chart.
●
Make sure you keep the
flame ports clear. Soiling
from food spillage may clog
these and cause ignition
problems or uneven flame
patterns.
●
Remove stains left by food
or spillovers as soon as
possible. If left to burn on,
they may be difficult to
remove or even permanently
discolour these parts.
●
Before replacing the burner
parts, make sure that they
are completely dry. Wet
burner parts may result in an
irregular flame.
●
Before lighting a burner you
have reassembled, check
that all of its parts have
been positioned correctly.
Incorrect assembly can cause
dangerous irregular flames
and ignition problems.
Ignitor and
probe
At least once
a month
Clean these very carefully
using a toothbrush dipped
into methylated spirits.
A clean ignitor ensures
trouble-free sparking. Check
the ignitor regularly to make
sure it is clean.
All gas
components of
the cooktop
Once every 3-4
years
●
Contact your local
Authorised Repairer to
perform a thorough check
on all gas components of the
cooktop.
●
For Authorised Repairer
details, see your Service &
warranty book or contact
Customer Care.
●
All checking and
maintenance must be
performed by a suitably
qualified person.
●
If the gas is connected with
a flexible hose, checking
should include inspecting the
entire length of the flexible
hose assembly for any sign
of wear or damage.
Flame
ports
Ignitor
Probe
Summary of Contents for CG752D
Page 2: ......
