INSTALLATION
PTFE tape
3⁄8
”
NPT
3⁄8
”
NPT
½
”
NPT
20” (500 mm)
2” (50 mm)
1
2
¾” - 2”
(20-50 mm)
1
1
2
NG/LP
½
“ NPT
Arrow
x 4
1
2
2”+
(
50+ mm)
1
2
A
Check under the regulator for
correct orientation.
C
E
B
D
F
7
The CookSurface requires adequate air supply to fully function. The base of the CookSurface must have direct
unrestricted ventilation to the room where the CookSurface is installed. Do not ventilate the base area to an
external area that can be at different air pressure to that of the burners. You may ventilate from adjacent
cupboards, but ensure that the available air supply will not be restricted.
The ventilation area must be 20” x 2”
(500 x 50 mm) or of an equivalent area. If the 2” (50 mm) wide slot is not possible due to the width of the available
toe recess, increase the length of the slot so as to maintain an equivalent area of 100 in
2
(250 cm
2
).
An air intake grill is provided. Ensure that the grill is not covered or obstructed.
Fresh air from
outside cabinetry
Fresh air from
outside cabinetry
Refit existing
screw to secure
into basepan
view from below
Note: metal flexible
hose not supplied
For countertops thicker than 2” (50 mm),
reverse the clamping brackets, as shown
Refit existing
screw to secure
into basepan
(1,1) -2- 599648B izonaCG363cs installA2USCA.indd 4/5/09 11:15:08 AM
(1,1) -2- 599648B izonaCG363cs installA2USCA.indd 4/5/09 11:15:08 AM