Fig. 3
Fig. 4
Location of Nameplate Label
Fastening the Cooktop to the Counter
1. Turn the cooktop upside down and place it on a soft surface.
2. Spread the seal around the edges of the cooktop with the adhesive side facing down, as shown in Figs. 6 and
7. Make sure that the whole perimeter is sealed. Cut off any excess material.
3. Mount the supplied clamps (A) and screws (B) onto the cooktop, as shown (without tightening the screws).
4. Place the cooktop into the cutout, then tighten the screws to clamp the cooktop securely to the counter.
5. Using a sharp cutter or trimmer knife, trim the excess sealing material around the edge of the cooktop. Take
care not to damage the countertop.
if the countertop is thicker than 1 9⁄16” (40 mm), recess the underside to between 1 3⁄16” (30 mm)
and 1 9⁄16” (40 mm).
Updated: Thu, 18 Aug 2022 14:48:43 GMT
Powered by
7
