manualshive.com logo in svg

Fisher & Paykel B60SC8DEPX2, Service Manual

Share
Download
Fisher & Paykel B60SC8DEPX2 Service Manual Download Page 19

19

3.14 Limiters

All models have a fan run on limiter which is set 
to 55 deg C.
This limiter will keep the cooling fan running until 
the cavity temperature drops below 55 deg C.

The over temp limiter is one shot type Honest 
Well TY24, the trip temperature is 110 deg C. refer 
to parts manual.

3.15 Power Board

The power board is located in the top panel area, 
and is held in place by clips.

The power board is connected to the clock via a  
harness and controls the following components:

• 

Elements

• 

Door switch

• 

Temperature sensor.

• 

Door lock (pyro model only)

• 

Lights

• 

Rotisserie motor

• 

Cavity fan

• 

Cooling fan

The power board is a GOEP type board so is used 
in both the pyrolytic model and multifunction 
model. This means if being changed for any reason, 
the model ID must be selected for the product it is      

being fi tted to.

Refer to section 6 for more detail.

Summary of Contents for B60SC8DEPX2
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands