Fisher & Paykel AquaSmart, Installation And User Manual

Page: 39 / 112

Changing pre-set options
Adjusting your options
1
Enter the Option Adjustment mode (refer to page 36).
2
The diagram below shows how the wash cycle icons relate to the pre-set options you can
change. It also shows what will be displayed when you first enter Option Adjustment mode.
Options you can change are accessible using the HEAVY, DELICATE, SHEETS and EASY IRON cycles
only.
Use this diagram to help you adjust the options, eg select the HEAVY cycle to modify the wash
temperature, select the DELICATE cycle to change the out of balance (OOB) recovery process,
and so on.
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Fig.22 Option Adjustment mode
3
Use the MORE and LESS DELAY START buttons underneath the digital display to scroll
through the available settings of your selected option, or if your model does not have these
buttons, use the HIGH EFFICIENCY button.
Fig.24 Changing the pre-set options – if your
washer does not have the DELAY START buttons
use the HIGH EFFICIENCY button
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Fig.23 Changing the pre-set options
37
US
CA