Fisher & Paykel AquaSmart WL37T26DW2, Installation Instructions And User Manual

Page: 31 / 116

29
Changing pre-set options
AquaPlus Rinse
On the High Efficiency cycles you can
change the pre-set rinse option.
The pre-set rinse option on these cycles
is a water efficient Aqua shower rinse.
This rinse can be altered to provide
a more intensive rinse for people with
sensitive skin.
1
Enter the Option Adjustment mode (refer to page 28).
2
Press SOFTENER to change to an AquaPlus rinse (dispensing model); or SPIN to illuminate “Med”
spin to select AquaPlus rinse (non-dispensing model).
3
Press POWER to save your selection.
End of Cycle beeps
Note: This option is not available on the
non-dispensing model.
The number of beeps that signal the end of
the cycle can be altered. Choose between
no beeps, five or fifteen beeps. The BLEACH
button adjusts the cycle signal setting.
1
Enter the Option Adjustment mode (refer to page 28).
2
Press the BLEACH button to adjust the cycle signal setting.
3
Press POWER to save your selection.
Rinse Options – dispensing model
Softener ON AquaPlus Rinse
Softener OFF Aqua Rinse
Rinse Options – non-dispensing model
Med spin light ON AquaPlus Rinse
Med spin light OFF Aqua Rinse
End of Cycle Beeps
No selection No beeps
Bleach OFF 5 beeps
Bleach ON 15 beeps
EN