21
Drying cycle options
Delay Start
The DELAY START option enables you to delay the start of the drying cycle from between
5 minutes and 12 hours. Times you can select are 5 min, 15 min, 30 min, 1 hour, then hourly up
to 12 hours. This can be useful to time your drying to finish when you arrive home from work, or
to start when power rates are lower.
To programme a DELAY START, simply touch the MORE button to increase the delay time and
LESS button to decrease the time or to turn DELAY START off. Touch START/PAUSE to confirm
your selection and start the countdown. Once the DELAY START has been started, the time will
count down on the digital display in one minute increments, the DELAY START light will flash and
the START/PAUSE light will stop flashing and turn on solid.
Note: if you hold the MORE button down, the time displayed on the screen will increase after
every half a second (more convenient than touching the button repetitively).
To remove a delay start time once it is counting down, simply touch START/PAUSE, then touch the
LESS button to decrease the time to zero. Touch START/PAUSE to start the cycle immediately.
Important!
We suggest that you avoid using DELAY START for damp, non-colourfast items as this may
cause dye run to occur.
Customising dryer cycles
After using your dryer a few times you may discover there are some drying options you prefer for
some cycles.
You can programme your dryer to remember the drying options you prefer for each drying cycle.
For instance, you may want to set the EASY IRON cycle to a lower drying temperature or set the
EVERYDAY cycle so it automatically has the WRINKLE FREE option selected.
To customise a cycle:
1
Press POWER to turn the machine on.
2
Turn the dial to select the cycle you wish to customise.
3
Touch and hold any of the drying options buttons for 3 seconds. The lights will flash on and off
to indicate that the machine is in cycle adjustment mode.
4
Select the drying options you prefer by touching the relevant option button.
5
Touch KEYLOCK to save the selected settings. The dryer will then beep to indicate your
customised cycle has been saved.
Factory reset
You can reset your dryer to the default settings it left the factory with:
1
Turn the dial to select the FRESHEN UP cycle.
2
Touch and hold the DELAY START MORE , the DELAY START LESS and SIGNAL buttons
together for three seconds.
3
Your dryer will now be reset to the default settings.