Fisher & Paykel AeroSmart DE62T27DW1 Installation Instructions And User Manual Download | Manualshive

Page: 56 / 60

background image

54

Limited warranty

How to get service

Please read your User Guide. If you then have any questions about operating the product,
need the name of your local Fisher & Paykel Authorized Service Agent, or believe the product is
defective and wish service under this limited warranty, please contact your dealer or call us at:

USA and Canada

TOLL FREE

1.888.9.FNP.USA (1.888.936.7872)

or use the link at:

www.fisherpaykel.com/locator/servicer/

You may be required to provide reasonable proof of the date of purchase of the product before
the product will be serviced under this limited warranty.

Commercial use

If you are using the product in a commercial setting (any use other than a single family dwelling),
we agree to repair or replace, without cost to you for parts only, any defective parts, the serial
number of which appears on the product. Our liability for these repairs expires ONE YEAR from
the date of original purchase.

At our option we may replace the part or the product, or we may provide you a full refund of
the purchase price of the product (not including installation or other charges). All service under
this limited warranty shall be provided by Fisher & Paykel or its Authorized Service Agent during
normal business hours.

No other warranties

This limited warranty is the complete and exclusive agreement between you and Fisher & Paykel
regarding any defect in the product. None of our employees (or our Authorized Service Agents)
are authorized to make any addition or modification to this limited warranty.
Warrantor: Fisher & Paykel Appliances, Inc.

If you need further help concerning this limited warranty, please call us at above number, or
write to:
Fisher & Paykel Appliances, Inc.
5900 Skylab Road
Huntington Beach
CA 92647

This limited warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.

«
...
54
55
56
57
58
...
»

Summary of Contents for AeroSmart DE62T27DW1





























































Reviews:

No comments

Related manuals for AeroSmart DE62T27DW1

Brand: Taurus Pages: 83

Brand: Magic Chef Pages: 17

Brand: Ultrean Pages: 12

Brand: Kitchen Advance Pages: 10

Brand: Zenith Pages: 20

Brand: Amana Pages: 2

Brand: BOMANN Pages: 24

Brand: Alliance Laundry Systems Pages: 30

DuraDrum GTDL200GMWW

Brand: GE Pages: 8

Brand: GE Pages: 3

Brand: GE Pages: 3

DuraDrum GTDP200EMWW

Brand: GE Pages: 8

Brand: GE Pages: 3

Brand: GE Pages: 3

Brand: GE Pages: 4

Brand: GE Pages: 4

Brand: GE Pages: 4

DuraDrum GTDL200GM

Brand: GE Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands