38
@5
CABINET TRIMS INSTALLATION — [A] FLEXIBLE SPRING CLIP METHOD
4
Place three side trim brackets onto
each side trim.
Note: Measure from the top of the trim,
with the shorter lip at the bottom.
Refer to (
B
) for 2032mm and 2134mm
bracket locations and trim orientation).
IMPORTANT!
Each bracket has two engagement
points for the side trim to locate.
Ensure the trim is engaged in both
points (
C
).
Repeat for the remaining side trim.
2032mm
(80")
= 229mm
2134mm
(84")
= 330mm
2032mm (80")
= 914mm
2134mm
(84")
= 1016mm
2032mm (80")
= 1651mm
2134mm
(84")
= 1753mm
0
B
1
Break off the datum lip to each side trim
bracket and discard.
Repeat for all side trim brackets.
Discard
Top view of side trim engaged
correctly in side trim bracket
C
Side trim
bracket
Side trim
TWO METHODS ARE AVAILABLE FOR ATTACHING CABINET SIDE TRIMS:
[A] FLEXIBLE SPRING CLIP METHOD — RECOMMENDED METHOD
[B] FIXED SCREW METHOD — METHOD TO USE IF CABINET IS NOT TO SPECIFICATION
(Attempt method [A]. If method [A] results in poor fitment of side trims due to cabinetry that is uneven or out of specification, use method [B]).
A
Plastic
Aluminum
For 2032mm cavity installation only
2
Measure 102mm from the top of
the side trim with a square ruler
and mark a cutting line (
A
).
3
Cut along the line using a fine tooth
hacksaw to a length of 1930mm (
B
).
IMPORTANT!
●
Ensure the cut is straight and square
as this is an exposed surface.
●
Ensure the plastic part does not bend
as this can cause visual stress marks.
Repeat for all side trims.
short lip
Internal box
D
Cabinet side
trim install kit
Side trim bracket
(6)
Spring clip
(6)
External box
Cabinet side trim
(2)
Tools
Hacksaw
Pencil
