26
ACTIVESMART™ OPERATING INSTRUCTIONS
Bottle holder (where fitted)
●
●
The bottle holders can be used to store a variety of bottles.
●
●
To position the bottle holder in your refrigerator, slot the back edge of the bottle holder
onto the back trim of any shelf in the fresh food compartment.
●
●
Unused bottle holders can be stacked up on top of one another so they do not take up
unnecessary shelf space.
●
●
Bottles are best stored with the neck of the beverage facing the front of the refrigerator.
Glass shelves
●
●
Standard glass shelves can not be repositioned in your refrigerator. Refer to ‘Cleaning
and care’ for details on how to remove the standard
glass shelves for cleaning.
Cantilever glass shelves — half-width and full-width
●
●
The cantilever glass shelves are designed to be
strong and versatile.
●
●
The half-width and full-width shelves are removable
and can be repositioned in your refrigerator.
●
●
Place the half-width shelves side-by-side when you
store large items such as platters.
●
●
Place the half-width shelves at different levels to
maximise the storage space when you store items of
varying heights.
To remove for repositioning
1
Hold the front and back edge of the shelf firmly
A
.
2
Push the shelf up vertically to dislodge from back
support lugs
b
.
3
Slide the shelf towards you
c
.
Drip tray
●
●
The drip tray is designed to fit
into the bottom of the water
dispenser panel.
●
●
To insert the tray ensure the rounded
sides are fitted into the dispenser
panel first.
●
●
The purpose of the tray is to
capture drips of water that may fall
after dispensing.
●
●
The tray can be removed for cleaning.
Drip tray
A
b
c
