FB23083 & FB23084
Jeep® JL Wrangler
Step sliders - 4DR
(FB23083)
and 2DR
(FB23084)
2308300
REQUIRED TOOLS
16mm socket
18mm socket
OPTIONAL TOOLS
7/16” drill bit
Paint pen
Centerpunch
KIT CONTAINS
Step slider (L and R)
*Nut plate
*M10 bolt
*M10 flat washer
*M10 lock washer
* - Optional hardware
QTY
1 ea
2
2
2
2
1)
REMOVE FACTORY STEPS OR GUARDS
If equipped, remove the factory steps or rocker
guards.
2)
REMOVE HARDWARE
On the passenger side, remove the crossbar bolt
using an 18mm socket.
On a 2DR model, it may be required to loosen the
skid plate bolt to allow enough flex to fit the new
step slider between the frame and crossbar.
Remove the nuts from the rear-most body mount
using a 16mm socket. For 4DR models, repeat this
step on the middle body mount.
* FB23083 (4DR) shown
Drivers Side
Passenger Side
