Press and hold buttons
3
and
5
at power-up and then enter the password to toggle this between on and off.
When turning off Always Start in Valet mode, you will be required to enter your password twice.
Always Start in Valet mode is the only power-on button press that will work when the switch is locked.
Setting the Start Locked Flag
Once you set this, the switch will always start at your chosen start-up tune, but the display will show
L
at start-up
and will not accept commands until you correctly enter the password. This is useful if you want to be able to loan
your truck to a friend.
To enable the start locked feature, press and hold buttons
1
and
2
at power-up and then enter the password.
Setting Simpler Modes
The digital switch has a lot of features, for some people it has to many features. This enables you to disable some
of the features.
These are 3 modes:
o
Mode 1:
All features enabled
o
Mode 2:
Valet and High idle disabled
o
Mode 3:
All features disabled (All that works is press to change tunes)
Press and hold buttons
1
,
3
and
5
at power-up and then enter the password to enter this setting. Then press
button
1
,
2
or
3
to select your chosen mode. The display should show the number 1, 2 or 3 verifying your
selection. The press
5
to save your selection.
Tune Reverse Feature
Some tuners like to make tune 1 the biggest tune. This feature allows telling the switch to select tune 5 when
1
is
pressed and tune 1 when
5
is pressed.
Holding buttons
2
and
4
together at power-up will reverse the current order of the tune buttons. Each time you do
this, the state will toggle. A small letter
r
or
n
will show up telling you if the state has been set to normal or
reversed.
The Password
The default password is 1, 2, 3, 4, 1, 2, 3, 4. If your password is less than eight digits long you will only need to
enter the first password length digits of the password.
The password length may be set to anything between four and eight characters long.
When you see an
L
or
U
displayed the only way out is to enter the password or turn off the power. If you're in valet,
tune locked or start locked mode, powering down will not help as it will still be locked or in valet mode at power up.
The password length when shipped is four and so the out of the box password is 1, 2, 3, 4.
Changing the Password
Pressing buttons
1
and
4
together for five seconds will let you enter a new password. At the
L
, enter the current
lock code, at the
E
enter a new lock code and then at the
a
, enter the new lock code a second time. If you do all
three steps correctly the new code will be saved and an
H
will appear (indicating that Happiness has been
achieved
), otherwise, you'll see an
F
for failure.
Password functionality
When locked, the display shows
L
, in valet mode it shows
U
. While entering the password the display will show
A
,
B
,
C
and then the current tune. If it shows
A
,
B
,
C
, (
L
/
U
), you entered the password wrong and need to try again.
If you have more than a four character password, the display uses as much of the series
A
,
B
,
C
,
d
,
E
,
F
,
7
as
needed. The letters tell you which digit you’re entering.
When you’re holding buttons to reach a place requiring a password, the display will change to
P
to acknowledge
that your request has been accepted. Upon releasing the buttons, the display will change to either
L
or
U
.
