manualshive.com logo in svg

fischertechnik Robotics Sensor Station IoT, Activity Booklet

Share
Download
fischertechnik Robotics Sensor Station IoT Activity Booklet Download Page 11

TXT 

Smart Home

ROBOTICS

11

Robotics Sensor Station IoT

Sensors

Sensors are so to speak the counterpart to the actuators 

Actuators

. 

This is because they do not perform any actions, but react to certain 
situations and events. For example, a pushbutton reacts when pressed, 
allowing an electric current to flow or interrupting its flow. A heat sensor 
reacts to the temperature in its surroundings.
I will provide you with an explanation of the individual actuators and 
sensors in the project, when they are used for the first time.

Software ROBO Pro 4.4.x

ROBO Pro is a graphic programming interface for creating programs for 
the 

ROBOTICS TXT Controller

.

A "graphic programming interface" allows you to compile programs 
visually with the aid of graphic symbols instead of "writing" them out by 
hand line for line. An example of such a program is shown at the left.
The procedure for creating such a program is described in detail in the 
Chapter "First Steps". The 

ROBO Pro Help

 feature also shows how this 

works in Chapters 3 and 4. 
The current software is already installed on your PC.

ROBOTICS TXT Controller

The ROBOTICS TXT Controller is the heart of this ROBOTICS 

construction set. It controls the 

actuators

, and evaluates the 

information from the 

sensors.

For this purpose the ROBOTICS TXT Controller has numerous 

terminals for connection to the components. The instruction manual 
for the ROBOTICS TXT Controller describes which components can be 
connected to which connections and the functions of the connections.
The color touch screen allows convenient operation of your ROBOTICS 
TXT Controller. The camera contained in the construction set can be 
connected to the USB host port (USB-1). The integrated Bluetooth and 
WLAN interface is a particularly interesting special feature. It allows you 
to complete a wireless link between your PC and the ROBOTICS TXT 
Controller or between several controllers.

Summary of Contents for Robotics Sensor Station IoT



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands