18
MMS
®
Inspection SPG High
Settings for m
easurement
5 Settings for measurement
In order to measure, you need to create and open a batch (measuring appli-
cation file). In a batch, you define the measuring application and settings for
the measurement procedure, e.g. specification limit monitoring or grouping of
measured readings in measurement blocks during the measurement. The link
to the Calibration 001, to which the measurements are referenced, is also
saved in the batch file.
If a parameter changes, there is a new measuring application and you have
to create a new batch.
Overview of the possible settings you have to make before a measurement
Settings
Page
Visual inspection of probe tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Creating a new batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Opening a batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21