FISCHER Mess- und Regeltechnik GmbH
Operation | 5
BA_EN_FT90
89/108
5.6 Info
Path: \Info
Level: 1
\Info
1
2 3
4
Device
Version
Input 1
Input 2
U
Fig. 136:
Info
Various information for configuration and setting of the device is provided in this
menu.
Menu name
Description
Dev.
Device type, serial number
Revision
Firmware version
Input 1
Basic measurement range, spread
Input 2
Basic measurement range, spread
Analog output
Output signal
Switch output
Assignment, contact type
Back
E
This represents the output (exit) of the
information menu. Press 'back' to re-
turn to the main menu.
Information about the device and the configuration are provided in this menu.
5.7 Service
Path: \Service
Level: 1
\Service
1
2 3
4
Load configuration
Save configuration
USB —▶ configuration
Configuration—▶ USB
U
Fig. 137:
Service
Menu name
Description
Load configuration
The configuration saved in the flash
memory of the device is loaded.
Save configuration
The configuration is saved in the flash
memory of the device.
USB —▶ configuration
The configuration saved on a USB
drive is loaded.
Configuration —▶ USB
The configuration is saved to a USB
drive.
Factory settings
The parameterisation is reset to the
factory setting.
Update firmware
The firmware update saved on a USB
drive is performed.