5 | Operation
FISCHER Mess- und Regeltechnik GmbH
86/108
BA_EN_FT90
5.5.4.7 LCD contrast
Path: \Configuration\Display\LCD contrast
Level: 3
\...\...\LCD contrast
1
2 3
4
OK Cancel
Edit
0
U
Fig. 130:
LCD contrast
This parameter can be used to set the contrast for the LC display.
5.5.5 Modbus RTU
NOTICE! This menu is only available for devices with a Modbus interface.
Path: \Configuration\Modbus RTU
Level: 2
\...\Modbus RTU
1
2 3
4
Baud rate
Data format
Modbus address
Byte order
A
U
A
A
Fig. 131:
Modbus RTU
Menu name
Description
Baud rate
A
The baud rate is set with this menu.
Data format
A
The data format (data, parity, stop-bit)
is defined for the transmission with this
menu.
Modbus address
The DE90 address is entered with this
parameter.
Byte sequence
A
The byte order for the floating point fig-
ure is defined with this menu.
Back
E
This represents the output (exit) of the
menu. Press 'back' to return to the con-
figuration menu.
