5 | Operation
FISCHER Mess- und Regeltechnik GmbH
40/108
BA_EN_FT90
\...\Designation
M
M N O P Q R
D
L
K
J
I
H
B
easuring point
U
1
2 3
4
û
Cursor
Selection field
Character list
Fig. 55:
Editing text
In this display, the cursor is controlled with the button
û
. The cursor can only
be moved to the right. It is not possible to move back. If the cursor is moved
past the edge, the display for selecting the action (see above) is displayed
again.
Text is edited with the selection field in conjunction with the current cursor posi-
tion. The button
ÿ
moves the list of characters
(2)
to the left and the button
þ
moves it to the right. Once the correct character is shown in the selection field, it
can be accepted with the button
û
at the cursor position. The cursor moves
one character to the right and the next character position can be edited.
5.1.6.2 Value input
For example:
Path: \Configuration\Channel 1\Measurement C1\Meas.range C1 start
Meas.range C1 start
OK Cancel
Edit
-100.000
Pa
U
1
2 3
4
Meas.range C1 start
-100.000
Pa
-100.000
100.000
1
U
1
2 3
4
û
Limit (min.)
Pointer
Bar graph
Limit (max.)
Cursor
Fig. 56:
Entry of numerical values, 1st position
þ
ÿ
Fig. 57:
Setting a figure
Entry of digits one by one
Numerical values can be entered digit by digit from left to right. The buttons
ÿ
and
þ
are used to set the digits 0 to 9. The plus/minus sign changes automat-
ically in accordance with the selected movement direction. The limit values de-
termined from the device configuration cannot be undercut or exceeded. A set
digit is accepted using the button
û
. The cursor then moves one position to
the right. The movement direction of the cursor is defined and cannot be
changed.
(2)
The list of characters comprises the characters of the character set Windows 1252 (Latin 1 and
Latin 9)