FISCHER FISCHERSCOPE X-RAY 4000 Series, Operator'S Manual

Page: 7 / 170

FISCHERSCOPE
®
X-RAY 7
Intended Use Safety Information
1 Safety Information
When used as intended, the FISCHERSCOPE ® X-RAY is safe in its operation. When you
use the instrument as intended and observe the safety information, the instrument does
not pose any risks.
Please read and follow these instructions and observe the safety information. Please also
note the generally applicable regulations concerning safety and accident prevention.
1.1 Intended Use
The FISCHERSCOPE X-RAY is used for coating thicknesses measurements and for
materials analysis. The measurement method conforms to DIN 50 987, ASTM B568 and
EN ISO 3497.
The specifications of the instrument and of the accessories are described in the data sheet
in the Attachment to this Operators Manual.
Only accessories recommended and approved by FISCHER may be connected to this
instrument.
Modifications, repairs, maintenance and service work on the FISCHERSCOPE X-RAY and
its accessories must be performed by authorized FISCHER service personnel only.
There is no other intended use. The risk for damage from unintended use lies solely with
the user.
1.2 Safety of the Electrical Equipment
The FISCHERSCOPE X-RAY is designed as a Protection Class I instrument according to
the IEC 348 / VDE 0411 standard. The instrument contains components under line voltage
and under high voltage. Observe the directives and standards IEC 348, VDE 0411.
1.3 Maintenance and Repair
Repair, maintenance and service work on the FISCHERSCOPE X-RAY and its accesso-
ries must be performed by authorized FISCHER service personnel only.
Exceptions are described in the operator’s manual, as replacing the line fuse.