FISCHER Mess- und Regeltechnik GmbH
Product and functional description | 2
BA_EN_EA16
7 / 88
2 Product and functional description
2.1 Use as intended
The EA16 is a measuring value display unit for measuring transducers with out-
put signals for current and voltage acc. to IEC 60381. Up to four measuring
transducers in two or three-conductor versions can be connected.
Typical applications
• Measured value display in clean room
Important features
• 3.5" (8.9 cm) TFT Touch LCD colour display
• Configurable colour switching
• 2 or 4 channel mode with …
– 2 or 4 configurable analogue inputs
for uniform signals (0/4 … 20 mA, 0 … 10 V) acc. to IEC 60381
(signal ranges ca be selected freely within the limits; see Technical
Data)
– 2 or 4 configurable analogue outputs
with possibility of characteristic curve spread and reversal with any off-
set
– 2 or 4 configurable switching outputs
with potential-free relay contacts or semiconductor switches
• USB interface
• Optional Modbus RTU interface
• Optional data logger function with data storage on Micro SD card
• Configuration of all parameters and a measuring point protocol
(1)
are pos-
sible via PC software
2.2 Function diagram
1E
2E
3E
4E
USB
SD
A
D
A
D
A1
A2
A3
A4
K1
K2
K3
K4
CPU
2
1
3
4
5
6
Modbus RTU
7
Fig. 1:
Function diagram
1
Analogue inputs
2
Analogue outputs
3
Touch colour display
4
Switching outputs
5
Micro SD memory card
6
Micro USB interface
7
Modbus interface (option)
(1)
parameter profile
