General operation
14.7.16
Kapitel/Chapter 13: General operation - Seite/Page 143
13.4.3 The configuration menu ("config")
STOP!
Settings in this area must only be entered by Fischer
Panda associates and Fischer Panda service points.
The "config" sub-menu is a password protected area in which the generator type can be selected, and generator
parameters in the EEPROM can be modified.
13.4.4 The network ID
STOP! Network ID must not be modified
Settings in this area must only be entered by Fischer
Panda associates and Fischer Panda service points.
Changing the network ID can result in malfunction.
13.4.5 Saving settings and exiting the set-up menu ("Save & Exit")
After setting all parameters, you can exit the set-up menu with the menu item "Save & Exit".
Fig. 13.4.5-1: Saving the values to the EEPROM
In doing so, all settings entered in the sub-menus
backlight 1, backlight 2, dimtime, and Network ID are
saved to the EEPROM.
Then, the goodbye screen appears for 3 seconds, and the controller is switched off. At the next start of the controller,
the changes will take effect.
13.4.6 Activating/deactivating the autostart function ("Autostart")
WARNING: Automatic start-up
DANGER TO LIFE! - Improper operation can result in
health impairment and death.
While the automatic start-up function is active, the generator
can start up automatically. Before activating it, ensure that
the generator capsule is closed and that the corresponding
warning signs are affixed to the generator.