Fischer Panda 10000x, Manual

Page: 156 / 190

Panda xControl
Seite/Page 156 - Kaptitel/Chapter 11: Panda xControl 10.6.16
11.0.7 Switching on the generator
Fig. 11.0.7-1: Switch the generator on
Press the „ON/OFF“ Button to switch the generator on
With this you switch the generator into the standby mode.
If the automatic start option is set in the menu, the
generator may start by an external signal.
Fig. 11.0.7-2: Welcome screen
The CP-G Panel shows the welcome screen for 2 seconds.
Fig. 11.0.7-3: Address screen
After that the CP-G shows the address screen for 1 second
Fig. 11.0.7-4: Overview screen 1 symbolic
At the end of the switch on, the CP-G Panel will show the first
overview screen.
Which screen the display shows (symbolic-english text-
german text) can be set up in the menu.