FirstWatt F5 Turbo V3, Assembly Instruction Manual, Page: 4 / 15

F5 Turbo Assembly Instruction Version 2 Page 4
p. Note that the MUR3020W should have their leads bended 90 deg also and then inserted
into the PCB holes from bottom of the PCB. Do not forget the insulation sheet for them. It
should be quite easy to do so as the leads of MUR3020 is just long enough to protrude out
the hole by about 1.5mm.
q. When all the PCB screws are in position and tighten, solder all the leads on top.
r. Note that the varistors should be mounted as below. The leads must not touch any ground
as it carries the +ve or –ve high voltages!
www.FETAudio.com