5
STEP 4
Set Rear wheels
Turn the walker over to other
side and release the red button
by pulling up on the button, and
the legs (with wheels) will drop
down and “lock” into place.
NOTE: Listen for the legs to click into
place to ensure appropriate assembly.
All wheels should now be in place.
STEP 5
Set Seat
Stand the walker up on all 4 wheels.
Push the seat down, expanding the
walker into a locked, standing and
secure position.
NOTE: Listen for the “click” as the seat
locks into this “ready” position.
STEP 6
Install Armrests
Install armrests with attached
backrest (as shown) by inserting the
tubes into the armrest post holes.
While inserting and lowering the
armrests into the 2 tubes, depress the
red EZ Adjust Height Control button,
allowing armrests to “click” into place,
adjusting to fit your appropriate height.
NOTE: Make sure the backrest is positioned at
the front of the walker and the armrests are
positioned as shown, i.e., the armrests slope
UP towards the front of the walker.
SET-UP
Perfect Walker
™
Back
Back of
Armrests
Front