background image

 

Support 

For support questions or warranty assistance contact: 

SenX Technology

 

5315 Sunset Drive 

Midland, MI 48640 

Phone 866 832 8898    Fax 989-832-8908 

Or visit our website at 

www.senxtech.com

    

 

Warranty 

SenX Technology, LLC warranties the products described herein for a period of 1 year 
under normal use and service from the date of purchase, that the product will be free of 
defects in material and workmanship. This warranty does not cover ordinary wear and 
tear, abuse, misuse, overloading, altered products,  or damage caused by the  purchaser 
connecting the unit incorrectly. 

THERE  IS  NO  WARRANTY  OF MERCHANTABILITY.  THERE  ARE  NO  WARRANTIES WHICH 

EXTEND BEYOND THE DESCRIPTION HEREIN. THERE ARE NO WARRANTIES EXPRESSED OR 

IMPLIED  OR  ANY  AFFIRMATION  OF  FACT  OR  REPRESENTATION  EXCEPT  AS  SET  FORTH 

HEREIN. 

REMEDY 

SenX Technology, LLC sole responsibility and liability, and purchaser's exclusive 
remedy shall be limited to the repair or replacement at SenX Technology option, 
of a part or parts not conforming to the warranty. 

All 

products requiring warranty 

service shall be returned to SenX Technology within I year of purchase, shipping 
prepaid.  SenX  Technology  will  return  repaired  or  replaced  products  to  the 
purchaser via prepaid ground transportation. In no event shall SenX Technology 
be  liable  for  damages  of  any  nature,  including  incidental  or  consequential 
damages, including but not limited to any damages resulting from non-conformity, 

defect in material or workmanship. 

Neither SenX Technology LLC nor its affiliates shall be liable to the purchaser of 
this product or third parties for damages, losses, costs, or expenses incurred by 
the purchaser or third parties as a result of: accident, misuse, or abuse of this product 
or unauthorized modifications, repairs or alterations to this product, or failure to 
strictly comply with SenX Technology's operating and maintenance instructions. 

 

FirstLook

®

 and SenX

®

 Technology are trademarks of SenX Technology, LLC  

No  part  of  this  publication  may  be  reproduced,  stored  in  a  retrieval  system,  or 

transmitted  in  any  form  or  by  any  means,  electronic,  mechanical,  photocopying, 

recording, or otherwise, without the prior written permission of SenX Technology, LLC. 

Summary of Contents for ADS ES 300









Reviews: