FT-MB164-DC Installation Guide
Data Controller (DC)
Remote Start for Mercedes
2006 - 2009 ML, GL, and R Class
Copyright 2010 Firstech, LLC. | 3
27. Reinstall the COMAND by first plugging in all harnesses and antenna connections that you
removed in step 7.
28. Slide the COMAND back into its opening.
29. Push up on the radio retaining bars to secure the radio.
30. Reinstall the (2) T-20 screws to secure the radio retention bars.
31. Confirm the proper operation of the COMAND unit.
32. Reinstall the HVAC panel by inserting the top edge of the panel just below the face of the
COMAND unit.
33. Push the bottom edge of the HVAC panel toward the dash.
34. Pull downward to confirm its proper location. If done properly, the upper edge will catch on its
retainer and will not allow it to move downward.
35. Align the opening in the HVAC panel with the slide out drawer at the bottom and provide gentle
pressure to snap the bottom edge into place.
1) Pull out on bottom of HVAC panel
2) Pull down on HVAC panel
3) R class panel removal
4) Remove T-20 screws
Installation Images
Insert panel tool here, one side at a time
