Description of antenna module installation position
<< Antenna Module >>
<< Harness >>
<< Installation of Antenna Module >>
Note:
Use the power of car b12volts).
The Antenna module have been calibrated for horizontal installation at the left-top corner of
the windshield.
Remote Coding / Programming Routine
IMPORTANT:
Every Firstech remote must be coded to the system prior to performing any
operations. All remotes must be coded at the same time.
Programming Remotes:
STEP 1:
Activate Valet/Programming mode by manually turning the ignition key
on
and
off
(between
the Acc & On positions) five times within 10 seconds. The vehicle’s parking lights will flash once with
the successful completion of this step.
STEP 2:
Within 2 seconds after cycling the ignition for the 5
th
time, tap the Lock button on
2 way
remotes
or the (lock) button on
1 way remotes
for a half second. The parking lights will flash once
to confirm the transmitter has been coded.
Exiting Programming:
Programming is a timed sequence. The parking
lights will flash twice signaling the end of programming mode.
Programming Multiple Remotes:
After the confirmation flash given in
step 2, code additional remotes by pressing button
(I)
on
2 way
remotes
or the (lock) button on
1 way remotes
. The parking lights will
flash once confirming each additional remote. All compatible systems
can recognize up to 4 remotes.
