Care and cleaning (continued)
6
Care and cleaning
For First Time Use only, Start at Step 4 :
1.
Unplug Opal and remove drip tray
2. Remove filter
(if present), and replace with
the reservoir’s screened intake cap.
3.
Drain Opal (see page 9 for detailed
instructions).
4.
Plug in Opal and slide the rear switch to the
“Clean” position.
5.
The display ring will light up yellow and
pulse.
NOTE: Do not use soap to clean the water
reservoir. Do not clean Opal immediately
a er use, wait at least 1 hour.
6.
Create a solution of five (5) cups water and
one (1) tsp household bleach.
7.
Pour solution into water reservoir.
8.
Touch the display button to start the
cleaning process, the light will start to spin
and you will hear water circulating. A er
three minutes the water will stop and the
light will begin to pulse again.
Chemical Exposure Hazard, when cleaning with Bleach, use bleach in a well
ventilated area and avoid mixing bleach with other household cleaners.
To clean Opal’s internal components, complete the following steps:
Unplug the product before cleaning by hand, and when not in use.
