Uploading heartbeat data and recharging the device
To ensure electrical safety, the device must not be connected to a computer when attached to a person.
The data is uploaded via Firstbeat compatible software or a browser plug-in. Attach the device to the
computer’s USB port and open the Firstbeat compatible software.
Attach the device to the computer’s USB port to recharge the battery. The charging begins automatically.
Multiple devices can be recharged simultaneously in a USB hub that is connected to the power network.
Note!
Do not recharge multiple devices in a USB hub that is
connected to the computer’s USB port because all devices
might not charge fully. Also, do not store fully charged
devices in a USB hub!
When re-attaching the cable, make sure it goes in the
right way (see image on the right) and snaps all the way in.
Explanations for signal lights while attached to the USB port
Orange led is flashing once per second.
The battery is charging.
Orange led burns continuously.
The battery is fully charged.
Green led burns continuously.
Bodyguard 2 is in communication with the computer.
Green led is flashing rapidly.
Reading measurement data.
Technical specifications
Rechargeable battery (last app. 6 days)
Storage capacity: app. 20 days
IP class IP52 (in recording mode)
Weight: 24 g
Measurement accuracy for heartbeat recording: 1 ms (1000 Hz)
Measurement accuracy for movement:
o
Sampling frequency: 12.5 Hz
o
Resolution: 8 Bit
o
G-scale: 4G
Bodyguard 2 data can be uploaded directly to Firstbeat programs (Analysis Server, Firstbeat SPORTS)
Data upload and battery charging is done directly via the USB-port
In case of questions, please check
www.firstbeat.com/support
or contact Firstbeat technical support
tel. +358 20 7631 664 (Mon-Fri 9.00-16.00 GMT +2) or [email protected].
X
