www.first.si
6
Solid fuel boiler - Maintain a constant temperature in
heating circuit
M
M
Maintain a constant temperature of heat reservoir
UNI TEMP
UNI TEMP
UNI
TEMP
UNI TEMP
UNI TEMP
DTC100/2
M
Examples:
U
N
I
T
E
M
P
M
UNI
TEMP
ROTOTERM
MR-TR
Maintain a constant temperature in
sanitary water circuit
Floor heating - Maintain a
constant temperature of
heating circuit
Solar pool heating - Maintain a constant temperature of
heating circuit
Floor heating regulation
from radiator heating circuit
UNI TEMP
UNI TEMP
www.first.si
7
FIRŠT-ROTOTEHNIKA, s.p.,
Radegunda 54, 3330 Mozirje
info@first.si, http://www.first.si
PE VELENJE:
Koroška c. 56a, 3320 Velenje
tel: 03 / 898 35 00, fax: 03 / 898 35 35
In compliance with standards
All our products fulfil the essential safety and protection requirements for CE conformity marking according to the
following directives
:
EMC dire
ctive: 2004/108/EEC
/ LV dire
ctive: 2006/95/EEC / PAH directive 2005/69/EEC.
In compliance with standards:
EN 60730-2-14
;
1997 + A1:2001 + A11:2005 + A2:2008
EN60730-1:2000 + A12:2003 + A12:2004 + A14:2005 + A16:2007 + A2:2008
EN 55014-1:2006
EN 61000-3-2:2006
EN 61000-3-3:2006
EN 62233:2008
ZEK 01.2-08
We reserve the right to modify the instructions and the technical data of the product without prior notice.
Safety notes:
ź
The actuator has been designed for use in stationary heating, ventilation and air-
conditioning systems and is not allowed to be used outside the specified field of
application, especially in aircraft or in any other airborne means of transport.
ź
Caution power supply voltage – 24VAC.
ź
It may only be installed by suitably trained personnel. All applicable legal or
institutional installation regulations must be complied with.
ź
The device must be protected from moisture and is not recommended for use in
external applications.
ź
The device may only be opened at the manufacturer's site. It does not contain any
parts that can be replaced or repaired by the user.
ź
The cable must not be removed from the device.
ź
The device contains electrical and electronic components and is not allowed to be
disposed of as household refuse. All locally valid regulations and requirements
must be observed.
Recommended mounting position
Examples: