background image

10

11

OPERATION and CONTROLS

HOW TO WORK THE CONTROLS 

Press 

MENU

 button 

to select the 

menu item you 

want to adjust. 

Press 

MODE

 button

to 

TOGGLE

 between

the Discrimination

and All Metal

Modes.

POWER 

ON/OFF

Press and hold 

the Pinpoint 

button to 

actuate 

PINPOINT 

at any time. 

Press      or      Buttons

to 

CHANGE THE SETTING

of the active menu item.

The active menu item is

the Highlighted line

on the left side of

the display.

POWERING UP

Press 

• The detector always starts in the DISCRIMINATION Mode.

Motion is required.

• Default sensitivity is at about 70% of maximum, (08).
• All target categories except iron are illuminated, meaning that all metal

objects will be detected except iron.

OPERATION and CONTROLS (

cont.)

MENU SELECTIONS

1. SENSITIVITY

Use 

and 

to increase or decrease sensitivity while the SENSITIVITY

line is highlighted.

Maximum sensitivity setting is 12.
Minimum sensitivity setting is 4.

If the detector beeps erratically or beeps when there are no metal objects
being detected, reduce the sensitivity.

The searchcoil produces a magnetic field and then detects changes in that
magnetic field caused by the presence of metal objects.  This magnetic field
that the detector creates is also susceptible to the electromagnetic energy
produced by other electronic devices.  Power lines, microwave ovens, lighting
fixtures, TVs, computers, motors, etc…. all produce EMI which can interfere
with the detector and cause it to beep when no metal is present, and
sometimes to beep erratically.

HOW DEEP WILL IT GO?

The Titanium Camo Metal Detector will detect a coin-sized object, like a
quarter, to a distance of about 11” from the searchcoil at maximum sensitivity.
Large metal objects can be detected to a depth of several feet.  Detectability
is directly related to the size of the metal object -- the larger the object, the
deeper it can be detected.

Accuracy of Target Identification is also related to distance from the coil.
Beyond a distance of 8”, the accuracy of Target Identification begins to
diminish.

Discrimination and All Metal Modes have independent sensitivity settings.
First highlight the mode, then adjust the sensitivity level for that mode.

Summary of Contents for Titanium Camo





















Reviews: