![First Team RETROFIT42 Assembly Instructions Download Page 3](http://html.mh-extra.com/html/first-team/retrofit42/retrofit42_assembly-instructions_2293871003.webp)
tightening nuts. DO NOT OVERTIGHTEN NUTS! If the lockwasher is
fully compressed, it’s tight enough. Attach coverplate to rim and
hang net.
7.
Finally, check rim height for 10’. If raising or lowering is
necessary, loosen the (4) 3/8” hex nuts on the (4) carriage bolts
and adjust as needed until rim is at 10’ and backboard is level.
Tighten nuts.