1.
Unpack all components. Identify each piece based on either Figure A (portable goals) or Figure B (permanent/semi-permanent
goals).
2.
First, using (2) ½”x 1” hex bolts and (2) ½” lockwashers, secure (1) Corner Splice into each Upright as shown in Figure D.
IMPORTANT!! If you plan to use soccer post padding on goal uprights, be secure corner splice to Upright at attachment hole #2
as shown in Figure D. Otherwise secure corner splice at attachment point #1. (Use 1 hex bolt and lockwasher on each Corner
Splice) Note: The Corner Splice is a tight fit, some paint may scrape off when inserting Corner Splice into Upright.
3.
Then, using (4) ½”x 1” hex bolts and (4) ½” lockwashers provided, attach the UPRIGHT
WELDMENTS to the CROSSBAR as shown in Figures A & B.
ATTENTION:
There is a LEFT UPRIGHT WELDMENT and a RIGHT UPRIGHT WELDMENT. The welded attachment
channel used to attach backstay to Upright should face up toward sky (see figures A & B) Additionally, if you purchased upright
padding with your soccer goal(s) be sure to include the padding spacer as shown in the diagram.
NOTE: IF YOU DO NOT
PLAN TO PAD SOCCER UPRIGHTS, DO NOT USE PADDING SPACERS!
HELFUL TIP: If you are using padding spacers, it is helpful to use (1) ½” flatwasher when attaching Crossbar to the
Upright at the point closest to the padding spacer. The ½” flatwasher will overlap the padding spacer preventing the
spacer from rotating.
