![FIRST TEAM SPORTS FANSTAND TIP N ROLL BLEACHER Assembly Instructions Download Page 2](http://html1.mh-extra.com/html/first-team-sports/fanstand-tip-n-roll-bleacher/fanstand-tip-n-roll-bleacher_assembly-instructions_2293877002.webp)
2
Depending on the bleacher style and number of bleachers shipped, packaging will vary to provide the
best shipping rate possible. All like parts and pre-assemblies are inter-changeable and may be package
together for best packaging solutions. Only the total count as provided on the attached packing list is
required for complete assembly of your bleacher(s). Prior to assembly make sure all bleacher
components are on hand.
STEP 2: BASIC ASSEMBLY RULES
Following are basic rules that must be followed in order to properly assemble your bleachers.
Rule 1:
All fasteners must be Grade 5 or equivalent. Grade 5 fasteners can be identified by 3 opposing
marks on the head of the fastener.
Rule 2:
When using a hex-head fastener or hex-nut over a slotted hole always use a flat washer over the
slotted hole.
Rule 3:
Always use a split lock washer on the nut side of each fastener.
Rule 4:
Do all assembly on a level surface. If floor damage is a concern, use protective
covering/plywood or other protective materials under your work area.
Rule 5:
Generally, do not tighten fasteners until all associated parts are in place and squared to each
other. After each phase of assembly is completed, make sure all fasteners are then tightened.
Rule 6:
Constantly check squareness of assembly as work progresses.
STEP 3: FRAME ASSEMBLY
Attach the rubber foot pads to the bottom of each frame. Insert the provided carriage bolts (5/16” x 2”)
from the bottom side for the rubber foot pad up through the frame. Make sure the carriage bolt head is
recessed into the rubber foot pad so as to prevent floor damage. Use the provided hardware (5/16” nut,
lock washer, and flat washer) on top of the frame to secure the carriage bolt.
STEP 4: WHEEL ATTACHMENT
All low rise bleachers are designed for the attachment of casters to the back of the frame. If you have
purchased the
optional wheels they can be attached at this time. Or, these wheels can be purchased
and attached at a later time. Wheels are only
attached to the frames at each end of the finished
bleacher assembly.