17
Figure 16. Seed Plates –
Steps 2,3 & 6
5.
Slide the plates and bushings out of
linkages, set plates to the side, hold
onto the bushings.
6.
Select plates you want in machine and
be sure to read etchings on plate
ensuring both plates have the same
size with corresponding sides.
7.
When reassembling the seed plate
assembly, be sure the left and right
plates are oriented as shown in Figure
16.
8.
Take seed plate assembly and slide
back into machine; be sure to put seed
plates on top of cut off plate when
starting to push them into the machine
as shown in Figure 17. Compressed
air may be used to blow out any debris
impeding the new seed plates from
sliding into place.
9.
Reattach the Adjuster Handle to the
Adjuster Mount as shown in Figure
13, and fasten bolts.
Figure 17. Seed Plates –
Step 7
